Sunday, 21 August 2011

CA 7 Commands Quick Reference | CA7 Commands Cheat Sheet.


CA 7 Scheduler.
CA 7 Commands Quick Reference.





CA7



Command

Description

LQ
|  LISTS ALL JOBS IN CA-7'S QUEUES AND
| WILL TELL WHICH QUE EACH JOB IS IN.

LQ,JOB=JOBNAME
| WILL TELL YOU WHICH QUE A JOB IS IN
LQ,JOB=JOBNAME,LIST=RQMT
| WILL LIST THE REQUIREMENTS THE JOB
| IS WAITING ON.
LQ,JOB=JOBNAME,LIST=Q
| WILL SHOW IF THE JCL CAME FROM THE
| OVERRIDE LIBRARY. WILL SHOW LAST
| STEP EXECUTED IF THE JOB IS ACTIVE.
LQ,JOB=JOBNAME,LIST=JCL
| WILL LIST THE JCL LOADED FOR THE
| JOB FOR THIS RUN ONLY.
LQ,ST=LATE
| LISTS JOBS THAT ARE LATE IN ALL
| QUEUES.
LQ,ST=RSTR
| LISTS ABENDED JOBS WHICH HAVEN'T
| BEEN REQUED AND LISTS ABEND CODE.
XQ
| LISTS ALL JOBS IN THE REQUEST QUE
| WAITING ON REQUIREMENTS TO BE MET.
XQ,JOB=JOBNAME
| USED TO EDIT A JOB, POST A REQUIRE-
| MENT, RESTART A JOB, PUT A HOLD ON
| A JOB, RELEASE A JOB, CANCEL A JOB,
| OR FORCE COMPLETE A JOB.
XRQ,JOB=JOBNAME,LIST=ALL
| IF JOB HAS ABENDED BECAUSE OF THE
| RQMTS WERE POSTED AND YOU WANT TO
| PUT THE RQMTS BACK ON IT, USE THIS
| COMMAND THEN PUT A 'U' TO UNPOST
| THE RQMTS.
LACT
| LISTS ACTIVE JOBS.
LACTR
| LISTS ACTIVE JOBS,CLASS & RESOURCES
LJES
| LISTS ALL ACTIVE JOBS AND LAST STEP
| EXECUTED.
LRDY
| LISTS ALL JOBS IN RDY QUE WAITING
| ON RESOURCES SUCH AS A TAPE DRIVE,
| INITIATOR OR HIGHER PRIORITY JOBS.
| ALSO LISTS WHETHER A JOB IS LATE.
LRDYP
| LISTS ALL JOBS IN RDY QUE. LISTS
| PRIORITY AND TAPE DRIVES NEEDED FOR
| EACH JOB.
LRDYP,JOB=JOBNAME
| EXPLAINS WHAT RESOURCES JOB IS WAIT
| ING ON TAPE DRIVES, CLASS BARRIER.
XUPD,JOB=JOBNAME
| THIS SCREEN SHOWS THE CLASS, TAPE
| DRIVES NEEDED AND PRIORITY OF A
| JOB. CAN BE UPDATED TO MOVE A JOB
| THRU THE RDY QUE TO THE ACT QUE
| FASTER BY INCREASING THE PRIORITY
| AND DECREASING THE TAPE DRIVES.
XWLB
| WORKLOAD BALANCING SHOWS TOTAL JOBS
| ACTIVE, TOTAL INITIATORS AVAILABLE,
| TOTAL MAX TAPE DRIVES ALLOWED, AND
| NUMBER OF INITIATORS OPEN PER CLASS
LQ,SEQ=DOTM,LIST=STATUS
| LISTS ALL THE JOBS IN REQUEST QUE,
| ACTIVE QUE, READY QUE AND ABENDED
| JOBS WITH THEIR ABEND CODES. LISTS
| ALL REQUIREMENTS NOT YET MET.
LIST,JOB=JOBNAME
| LISTS ALL STEPS IN AN ABENDED JOB
| AND FLAGS THE ABENDED STEP.
LJOBR,JOB=JOBNAME
| SHOWS THE AVERAGE RUN TIME OF A JOB
| BY AVERAGING THE LAST 6 RUNS. LISTS
| CPU TIME AND CLOCK TIME IN HHMM AND
| LAST RUN DATE AND TIME.
LJOB,JOB=JOBNAME,LIST=RQMT
| LISTS ALL REQUIREMENTS THAT NEED TO
| BE MET: DSN, USR, JOB. A / IN FRONT
| OF A JOB MEANS IT CAN'T RUN WITH AT
| THE SAME TIME AS THIS JOB. THIS IS
| CALLED A NEGATIVE DEPENDANCY.
LJOB,JOB=JOBNAME,LIST=DEPJ
| LISTS ALL JOBS DEPENDANT ON THIS
| JOB AND ALL JOBS YOUR JOB IS DEPEND
| ANT ON. CHECK THIS BEFORE CANCELING
| OR FORCE COMPLETING A JOB.
LJOB,JOB=JOBNAME,LIST=TRIG
| LISTS ALL JOBS TRIGGERED BY THIS
| JOB AND ALL JOBS THAT TRIGGER THIS
| JOB. CHECK THIS BEFORE CANCELING OR
| FORCE COMPLETING A JOB.
LJOB,JOB=JOBNAME,LIST=ALL
| LISTS ALL INFORMATION ON THIS JOB:
| SCHEDULING, RESTART PROCEDURES,
| DATA SETS, AND ALL REQUIREMENTS.
LJOB,JOB=JOBNAME,LIST=NODD
| LISTS ALL INFORMATION ON THIS JOB
| EXCEPT FOR DD STATEMENTS.
LJOB,JOB=*,JOBNET=WACC
| THESE ARE EXAMPLES OF FIELDS FROM
LJOB,JOB=XXXX*,MAINT=Y
| THE "JOB" SCREEN. WILL LIST THESE
LJOB,JOB=XX*,HOLD=Y
| FIELDS AND WHATEVER YOU SPECIFY
LJOB,JOB=*,EXEC=N
| FOR THE PARAMETER.
LJOB,JOB=X*,SCAL=XX
LPROS,JOB=JOBNAME
| LISTS ALL RESTART INFORMATION FOR
| THIS JOB.
LJCL,JOB=JOBNAME
| LISTS THE PRODUCTION JCL FOR JOB.
LPRRN,JOB=JOBNAME
| LISTS THE LAST SUCCESSFUL RUN OF
| THE JOB. LISTS START AND END TIMES
| DATE AND HIGHEST COND CODE.
LPRRN,JOB=JOBNAME,LIST=Q
| LISTS THE LAST SUCCESSFUL RUN OF
| THE JOB. LISTS START AND END TIMES
| DATE AND HIGHEST COND CODE. ALSO
| SHOWS IF JOB RAN FROM OVERRIDE
| LIBRARY.
LRLOG,JOB=JOBNAME,
| LISTS A JOB FOR THAT JULIAN DATE
DATE=*JULIAN DATE
| TO SEE IF IT RAN, WAS CANCELED OR
| ABENDED.
LRLOG,JOB=*,DATE=*JULIAN DATE
| LISTS ALL JOBS FOR THAT JULIAN
| DATE TO SEE IF THEY RAN, OR WERE
| CANCELED, OR ABENDED.
LRLOG,SEQ=JOB,LIST=RSTR,DATE=*
| LISTS JOBS THAT ABENDED IN LAST 5
| DAYS.
LRLOG,SEQ=JOB,ST=CANC,DATE=*
| LISTS JOBS CANCELED IN LAST 5 DAYS
LDSN,DSN=DATASET NAME,LIST=USERS
| LISTS ALL JOBS USING THIS DATA SET
| AND THE DISPOSITION FOR EACH JOB.
| JOB WITH NEW DISP CREATES THE DSN.
SSCAN
| SHOWS THE NEXT SCHEDULE SCAN OF
| CA-7. SHOWS THE NEXT WAKE UP TIME.
SUBTM,JOB=JOBNUMBER,TIME=HHMM
| TO CHANGE THE SUBMIT TIME FOR A
| JOB ALREADY IN THE REQUEST QUE.
| MUST USE MILITARY TIME IN HOURS
| AND MINUTES. USE THE JOB NUMBER.
ADDRQ,JOB=JOBNAME,DEPJOB=JOBNAME
| USED TO ADD A JOB DEPENDANCY TO
| YOUR JOB. WHEN THE DEPJOB ENDS
| RUNNING SUCCESSFULLY, THEN YOUR
| JOB WILL BECOME ACTIVE.
ADDRQ,JOB=JOBNAME,USR=COMMENTS
| TO ADD A COMMENTS DEPENDANCY TO
| YOUR JOB SUCH AS 'HOLD FOR PGMR
| TO LOOK AT IN THE MORNING'. MUST
| BE POSTED BEFORE YOUR JOB WILL RUN
CANCEL,JOB=JOBNUMBER,REASON=XXX
| TO CANCEL AN ABENDED JOB AND STOP
| THE TRIGGERING OF SUBSEQUENT JOBS.
| ALSO USED FOR A SKELETON JCL.
DEMAND,JOB=JOBNAME,SCHID=XXX
| PUTS A JOB IN THE CA-7 REQ QUE.
| IF THERE ARE NO REQUIREMENTS TO
| BE POSTED, JOB WILL AUTOMATICALLY
| BECOME ACTIVE.
DEMANDH,JOB=JOBNAME,SCHID=XXX
| DEMANDS A JOB INTO THE CA-7 AND
| PUTS IT IN THE REQUEST QUE. USED
| TO EDIT A JOB. WILL NEED TO POST
| THE HOLD REQUIREMENT BEFORE JOB
| WILL BECOME ACTIVE. RECOMMENDED.
DEMANDH,JOB=JOBNAME,SET=NTR,
| DEMANDS A JOB INTO CA-7 AND TELLS
SCHID=XXX
| CA-7 NOT TO TRIGGER SUBSEQUENT
| JOBS WHEN THIS JOB ENDS.
DEMANDH,JOB=JOBNAME,SET=SKP,
| DEMANDS A JOB INTO CA-7 AND TELLS
SCHID=XXX
| CA-7 TO SKIP THE NEXT SCHEDULED
| RUN OF THIS JOB.
DEMANDH,JOB=JOBNAME,TYPE=RES,
| DEMANDS A JOB INTO CA-7 AND TELLS
SCHID=XXX
| CA-7 THIS IS A RESTART OF THE JOB.
| RMS IS RESET TO BRING IN ALL DSN
| GENERATIONS OF THE LAST RUN.
DEMANDH,JOB=JOBNAME,TIME=HHMM,
| DEMANDS A JOB INTO CA-7 WITH A
SCHID=XXX
| TIME REQUIREMENT. USE MILITARY
| TIME, HOURS AND MINUTES.
REQUEUE,Q=RDY,JOB=JOBNAME
| TO REMOVE A JOB FROM THE RDY QUE
| AND PUT IT BACK IN THE REQUEST Q.
REQUEUE,Q=ACT,JOB=JOBNAME
| TO REMOVE A JOB FROM THE ACT QUE
| AND PUT IT BACK IN THE REQUEST Q.
| USED WHEN SYSTEM CRASHES!!!!!
FJOB,FROM=(MMDDYY,HHMM),
| TO FORECAST WHEN A JOB IS SCHEDULED
TO=(MMDDYY,HHMM),JOB=JOBNAME
| TO RUN. USE MONTH DAY YEAR FOR
| MMDDYY & HOURS & MINUTES FOR HHMM.
FJOB,FROM=(MMDDYY,HHMM),
| TO FORECAST WHEN A JOB IS SCHEDULED
TO=(MMDDYY,HHMM),JOB=XXXX*
| TO RUN. USE MONTH DAY YEAR FOR
| MMDDYY AND HOURS AND MINUTES FOR
| HHMM. JOB=XXXX* WILL SHOW ALL JOBS
| THAT BEGIN WITH THE FIRST FOUR
| LETTERS OF THAT JOB.
FJOB,FROM=(MMDDYY,HHMM),SPAN=HH,
| TO FORECAST WHEN A JOB IS SCHEDULED
JOB=JOBNAME
| TO RUN. USE MONTH DAY YEAR FOR
| MMDDYY AND HOURS AND MINUTES FOR
| HHMM. SPAN=HH WHERE HH IS THE NUM-
| BER OF HOURS YOU WISH TO SPAN FOR
|  THE JOB. SHOWS TRIGGERED JOBS.
FQJOB,TO=(MMDDYY,HHMM),
| FORECASTS SCHEDULE JOB AND IT'S
JOB=JOBNAME,TRIG=JD
| TRIGGERED JOBS.
FSTRUC, JOB=JOBNAME,SCHID=NNN
| USED TO TRACK A JOBSTREAM FLOW.
| SCHID=NNN WHERE NNN IS THE NUMBER
| OF THE SCHEDULED ID. THIS WILL
| LIST ALL JOBS TRIGGERED IN THAT
| JOBSTREAM. TO UNDERSTAND THE ORDER
| OF THE FLOW, CHECK THE LEVEL NUM-
| BERS AND THE TRIGGERING JOBS.
FRJOB,JOB=JOBNAME,SCHID=NNN
| REVERSE FORECAST. USED TO TRACK A
| JOBSTREAM FLOW BACKWARDS.
| SCHID=NNN WHERE NNN IS THE NUMBER
| OF THE SCHEDULED ID. THIS WILL
| LIST JOBS IN THAT JOBSTREAM FROM
| THE JOB SPECIFIED BACK TO THE
| ORIGINAL SCHEDULED JOB. CAN BRING
| IN MULTIPLE JOBSTREAMS FOR A SCHID.
LCTLG,DSN=DATASET NAME
| LISTS THE GENERATIONS, VOLSERS,
| DATES AND TIMES FOR A CATALOGED
| DATA SET.
CAT,DSN=DSNAME,VOL=XXXX,UNIT=XXX
| CATALOG DSN. USE VOLSER AND UNIT.
UNC,DSN=DSNAME,VOL=XXXXXX,
| UNCATALOG A DATA SET, SPECIFY DSN
UNIT=XXXX
| VOLSER & UNIT. WON'T DELETE DSN.
/SHUTDOWN,Z1
| SHUTDOWN CA-7 NETWORK WITH A FAST
| SHUTDOWN. LOGS ALL USERS OFF FIRST
| USED ONLY ON CA-7 MASTER TERMINAL.
NXTCYC,JOB=JOBNAME,SET=OFF
| STOPS ALL SCHEDULED RUNS OF THIS
| JOB UNTIL SET=ON IS SPECIFIED.
NXTCYC,JOB=JOBNAME,SET=ON
| STARTS SCHEDULED RUNS OF JOB AGAIN
NXTCYC,JOB=JOBNAME,SET=SKP
| SKIPS THE NEXT SCHEDULED RUN OF JOB
JOBCONN, USR, JOB=XXXXXXX
| WHERE XXXXXXX IS THE JOBNAME. THIS
| COMMAND WILL ALLOW YOU TO ADD A
| USR REQUIREMENT BEFORE THE JOB IS
| IN THE REQUEST QUEUE.
JOBCONN,JDEP,JOB=XXXXXXX
| WHERE XXXXXXX IS THE JOBNAME. THIS
| COMMAND WILL ALLOW YOU TO ADD A
| JOB DEPENDENCY ON A JOB BEFORE THE JOB
| IS IN THE REQUEST QUEUE.
HOLD,JOB=jobname
| HOLDS A SINGLE JOB CURRENTLY IN
| THE REQUEST QUEUE.
HOLD,Q=REQ
| HOLDS ALL JOBS CURRENTLY IN THE
| REQUEST QUEUE. IF NEW JOBS COME
| INTO THE QUEUE IT DOESN'T HOLD THEM.
SCHDMOD
| THIS COMMAND WILL SHOW YOU IF THE
| SCHEDULED JOB IS SCHEDULED. A '1'
| MEANS IT WILL RUN AND A '0' MEANS
| IT WON'T RUN.
LSCHD, JOB=XXXXXXXX,LIST=CALS
| THIS COMMAND WILL SHOW YOU THE
| SCHEDULE FOR A JOB AND IT'S
| CALENDARS. IT WILL SHOW IF A JOB
| IS SCHEDULED, TRIGGERED OR TRIGGERS
| OTHER JOBS.
LSCHD,JOB=XXXXXXXX,LIST=SIDxxx
| THIS COMMAND WILL SHOW YOU A
(Where xxx is the schid)
| PARTICULAR SCHID AND IT'S CALENDAR
| FOR A JOB. IT WILL SHOW IF THAT
| SCHID TRIGGERS OTHER JOBS.
LSCHD,JOB=*,SCAL=XX
| THIS COMMAND WILL SHOW YOU WHICH
(Where xx is the last 2
| JOBS USE A PARTICULAR CALENDAR.
characters of a calendar name)
/DISPLAY,ST=KEY
| DISPLAYS YOUR PFKEY SETTINGS
/DISPLAY,ST=JCL
| DISPLAYS THE LIBRARIES WHERE ALL
| THE DIFFERENT JCL RESIDES.
LOADH,JOB=JOBNAME,SCHID=XXX,
| LOADS NEW JCL ONTO THE CA7 DATABASE
SET=NTR
| BUT DOES NOT EXECUTE THE JOB.
RUNH,JOB=JOBNAME,SCHID=XXX
| RUNS THE JOB WITHOUT UPDATING THE
| LPRRN.
LLOCK,JOB=*
| SHOWS ALL JOBS THAT ARE LOCKED FOR
| WHATEVER REASON. JOBS CAN BE LOCKED
| BY SETTING THE NEXT CYCLE TO OFF, OR
| A JOB MAY BE SET TO SKIP THE NEXT RUN.
SCHD,DTRG
| BRINGS UP A MENU WHERE YOU CAN SETUP
| DATASET TRIGGERING.
SCHD,JTRG
| BRINGS UP A MENU WHERE YOU CAN SETUP
| JOB TRIGGERING.


If you like this post, then please don't forget to leave your feedback and check my you-tube channel Eurospottv and Eurospottv.com.


CA7 Share
Share CA7  Commands Quick Reference.

3 comments:

  1. My partner and I stumbled over here from a different page and thought I might
    check things out. I like what I see so i am just following you.
    Look forward to checking out your web page yet again.


    my web-site password hacking

    ReplyDelete
  2. Excellent article, I refer this article multiple times. Thank you and keep up the great work.

    ReplyDelete
  3. Good to see all commands at A place

    ReplyDelete